Home

Tuesday, June 15, 2010

PC HARDWARE

Basic Computer Hardware Information
This is a very short course about computers. It won't make you into a computer technician, but it will let you talk to one without thinking they are speaking a foreign language. The computers we are interested in are the general-purpose personal computers like we use at our desk, rather than the specialized computer under the hood of your car, or the big mainframe computers that the IRS uses to keep track of us all.
For our purposes, a computer can be defined as a machine for processing and storing information electronically. To be useful, it must have a way for us to get information into the machine, and some way to get it out afterwards so we can see it. Therefore, a computer has four basic functions:
1. Input2. Processing3. Storage4. Output
Every part of a computer system, and everything it does, is connected to one or more of these basic functions. Computers can seem complex because there are many ways of doing each of these functions, and because everything has a new name, often made up of what appear to be nonsense initials like RAM or CPU.
To keep it simple, first look up any word or technical term you don't understand. There is a glossary at the back of this course pack with definitions for all the technical terms we use here or that you are likely to hear in talking to technicians. Second, when you encounter any part of a computer for the first time, find out which of these four functions it is used for.
Input
The most obvious device for getting information (also called data) into a computer system is the keyboard. Another common input device is the mouse. Almost any time we use a computer we use one or both of these to get text data or instructions into the system. To get large amounts of information into the computer we would probably use a CD (compact disc), a floppy diskette, a modem connected to a phone line, or a network card connected to a network.
With the right sound equipment, a microphone or musical instrument can be used to bring in sound, and a digital camera can download visual information, so these are all being used as input.
Processing
If we just put information into the computer and took it out again later, computers could be much simpler. Most of the time though, we want to do something with it or change it in some way. Doing something with it is called processing, or data processing. Most of this takes place in a part called the processor, or Central Processing Unit. This is usually abbreviated to CPU.
The CPU is such an important part of the computer that we often refer to a system by the type of CPU it contains. My office computer is a Pentium III but at home I have an Athlon system. Sometimes you will hear the entire computer cabinet called a CPU.
To help the CPU there is another part that takes over a lot of the arithmetic. It is called the co-processor and also the Numerical Processing Unit or NPU.
The smallest piece of data that a computer can process is called a bit, and each bit will be either a one or a zero. For the sake of efficiency, the computer normally deals with a minimum of 8 bits at a time, and 8 bits together is called a byte. This is an important word to remember, because in working with computers you will hear about bytes frequently, and also megabytes which is one million bytes. Megabyte is usually abbreviated MB.
Storage
Information is stored in a computer in several different ways, but the main two are RAM and hard drive, also called a hard disk.
The hard drive can store huge amounts of information, and it can keep this information when the computer is turned off. The only problem with hard drives is that it takes too long to get the data from them, because the system must wait as the disk spins until the right part of the disk surface comes under the read heads, and then the drive transfers a block of data in sequence.
For information being used at the moment, the system needs to be able to get to any part of that information very quickly. The storage for this information is RAM, which stands for Random Access Memory. Random access means the system can ask for any piece of stored data at random and get it immediately, without waiting for to come up in sequence.
Random access is faster than sequential access. The main reason that computers don't just store everything in RAM is that information in RAM is lost whenever the power is turned off. So, the computer needs both RAM and disk storage. Everything stored long-term is on the disk, and whatever is needed at the moment is copied into RAM. If changes are made to the data in RAM, the changes must be copied back to the disk before that computer is turned off so those changes are not lost.
When people talk about the memory of a computer, they almost always mean RAM, and not the hard drive or other forms of storage that we haven't covered yet. Sometimes they will say 'main memory' just to be perfectly clear about it.
Output
There are a number of ways to get data back out of the computer. One of them is right there in front of your face, and that's the monitor. It has a screen that shows you information from the computer, so it is an output device. The monitor and the parts of the computer that run it are known as video. Another common output device is a printer, which of course puts the computer's output on paper for you.
Some devices are both input and output, like the floppy diskette mentioned earlier. If you have a modem or network connection, information can go both ways over the line so it's both input and output. In many cases it is practical to consider input and output together, in which case they are called Input/Output and abbreviated as I/O.
Software
The physical parts of as computer are called hardware. These are things you can see and touch, and yes, they are hard.
These same pieces of hardware are used whether you want to write a letter, balance your checkbook or play a game of computer solitaire, so how does this hardware know what to do, and when to do it? Actually, the hardware parts don't have a clue. They need instructions to tell them what to do, so some of that information we're storing and processing must be the instructions telling the computer what to do.
These instructions are called software, and they are organized into sets of instructions called programs. If you want to play a game on the computer, the computer must have a program with the instructions for that particular game. If you want to send e-mail, there must be an e-mail program.
One program called the operating system contains the instructions for actually running the computer. Certain things need to be done no matter what you are using the computer for. These are things like getting data on and off the disk, getting information to the monitor screen, and so forth. A program called Windows is the most common operating systems for PCs, and the one used in this office. It comes from a little company called Microsoft. Perhaps you have heard of it.
Anyway, the operating system takes care of the basic details of running the computer, and allows other programs to concentrate on their particular tasks. These other programs are called applications, because their job is to apply the computer to a specific task. When we say software, that can mean the applications, the operating system, or both.
There are other little chunks of software that attach to the operating system and tell it how to run particular hardware components or applications. These little chunks are called drivers, and anytime you add a piece of hardware to a system or upgrade to a new version of a device, you will need to have the right driver for that new piece of hardware.
Circuits
The word 'circuit' means a path something follows that goes back to where it started. In an electrical or electronic circuit, the thing following the path is of course electricity. Whatever work it does and whatever components it must go through on the way, the 'circuit' just means there is a complete path back to the starting point. The word 'circuitry' means the components, and the connections between them, that make up the path. It's as simple as that.
In a computer, this word 'circuit' shows up in a couple of places. Most of the components will be found soldered to a 'circuit board', also called a printed circuit board. This is a thin board of fiberglass, with the connections between components (called traces) printed right on the board in copper.
The components themselves are often something called an Integrated Circuit, abbreviated IC. To integrate means to combine things together, so an integrated circuit is one that combines many circuits into the same part. These are formed on a thin wafer or 'chip' of silicon, and you will sometimes hear an IC being called a 'chip'. This is also where we get the name 'Silicon Valley', for the area in Central California where many of them are made.
This chip of silicon is put into a case with metal legs, and tiny wires between the wafer and the legs connect those circuits with the outside world. There are now ICs containing millions of transistors and other components, all in a package that will fit in your palm with lots of room to spare.
The Motherboard
The biggest and most important circuit board in a computer is the motherboard. It's called the motherboard because every other part of the computer is connected to it. The CPU plugs into the motherboard, and so does the memory. And all the components that plug into the back of the case, like the keyboard and monitor, are connected from there to the motherboard. It is also called the system board.
There is a set of slots near the back edge of the board for plugging in other circuit boards, called adapter cards. These plug-in slots are for things like modems, sound cards, network cards and just about any other add-on feature you can think of. There is a set of traces connecting these slots to each other. A trace goes from Pin 1 of the first slot to Pin 1 of each of the other slots, and other traces connect each of the Pin 2s, each of the Pin 3s, etc. These traces then go on to connect to the memory, CPU, disk drives and other parts of the computer.
The Bus
These traces are called a bus, and they provide a way for each part of the system to exchange information with every other part. There are different types of bus that have been developed over the years, and your computer may have more than one. The most common one, found in every PC sold today, is called the PCI bus. An older version, still seen in some new computers, is the ISA bus. These are fairly easy to tell apart, because the connector that fits in the PCI slot has smaller pins and more of them.
One of the differences between PCI and ISA is that PCI supports a feature called Plug-and-Play, which allows you to add new hardware and have the system detect and configure it automatically. As anyone knows who has used the old method, plug-and-play is a great convenience.
Resources
Since just about everything in the computer uses the bus to exchange data, there must be a way to decide whose turn it is. This is done with something called an Interrupt Request, abbreviated IRQ. Each component or device that will need access to the bus is assigned an IRQ level, from IRQ 0 to IRQ 15, and there are lines on the bus that correspond to these levels. When a device needs to transfer data on the bus, it tugs on the appropriate Interrupt Request line and waits until the CPU grants an interrupt for that level. It's all very nice and orderly. IRQs are an example of a system resource, which is a feature available in limited quantity that must be assigned to specific components.
There are other resources too. Each device must have a unique memory location where their data is stored as it is transferred to and from the bus. These locations are called I/O Ports. For the BIOS and any other devices that use ROM, there must be a range of memory set aside, so that ROM and RAM are not trying to use the same addresses. These ROM addresses are a resource just like the IRQs and I/O Ports. Some devices need to transfer large amounts of data directly to and from memory without using an interrupt for each little piece of data. These devices, such as disk drives, are assigned a resource called DMA, for Direct Memory Access. Like IRQs, there are 16 DMA levels. Ports
In addition to the I/O ports mentioned in the last section which are really addresses, there are physical connections on the back of the computer that are also called ports, and various devices connect to the computer through cables attached to these ports. One of these connections is called the Serial Port because data goes over a single signal line as a series of bits, one right after the other. Serial port connectors have either 9 or 25 pins, with the male connector on the back of the computer and a female connector on the cable. The 9-pin version is more common, and is often used to connect a mouse if there is not a separate mouse connection.
Another connection is called the Parallel Port because its cable has 8 parallel signal lines to transmit 8 bits at a time. The computer has a 25-pin female connector on the back, so it won’t be confused with the 25-pin male serial connector. The parallel port is most often used to connect a printer. Computers sold in the last few years will probably also have a connection called USB, for Universal Serial Bus. It is a bus because several devices can be connected on the same cable, but it’s also a port because data goes into and out of the computer cabinet through its connector. There is USB1 and USB2. USB2 is newer and much faster.
The BIOS
As we mentioned earlier, the computer knows what to do by taking instructions from programs stored in RAM. The main instructions come from a program called the operating system, and those instructions direct traffic for other programs called applications.
When the computer is turned off, all the instructions copied into the RAM are gone. When the system is turned on again, it needs to go out to the disk, get the operating system and load it into RAM, but there are no instructions in the RAM to tell it how to do this. The solution to this problem is a set of instructions that stay in memory and don’t get lost when the computer is turned off.
This set of instructions is called the BIOS, for Basic Input Output System. Since the instructions don’t need to change, they can be stored in a different kind of chip than we use for RAM. It’s called ROM, for Read Only Memory. We say that the instructions in the BIOS are hard-wired, and instead of software they are called firmware.
The computer goes through a process called booting up when it is first turned on. This involves executing the BIOS instructions, loading the operating system from disk into RAM, and then turning control of the computer over to the operating system after everything checks out OK. The term refers to somebody pulling themselves up by their own bootstraps (without outside help, in other words). Any computer term that includes ‘boot’ will have something to do with this start-up process.
CMOS and RTC
There is other start-up information that normally stays the same but that we might want to change once in a while. This includes info about the various pieces of hardware connected to the system, which disk drive to check first for the operating system and that sort of thing. This data can’t be stored on the hard drive because we need it to boot up. It can’t be stored in RAM because it will be lost at power-off, and it can’t be stored in the BIOS because we might need to change it.
The problem is solved by a type of RAM chip that uses very low power, and it is connected to a battery. This type of low-power memory chip is called CMOS. It stands for the type of technology used in the chip, which is Complementary Metal Oxide Substrate. This is probably more than you need to know, but I’m a fanatic about defining things. By the way, since batteries don’t last forever, if you leave your computer unplugged for about 5 years you’ll find it needs a bit of trickery to get it to boot again, because the CMOS information will be gone.
There is another feature in the computer that has the same requirements as CMOS, and that is the date and time function. This obviously needs to change very minute, but we don’t want to lose track when the computer is turned off. The circuitry for this is called the RTC or Real Time Clock, and for convenience it is usually included in the same chip with the CMOS. A little trickle of juice from the CMOS battery keeps the clock running, and when you turn the computer on again it knows exactly what time and day it is. Convenient, isn’t it?
More About Video
The monitor is a passive device that just displays the video output from the system. However, so much data is needed for the constantly changing screen display that special provisions are made for it.
The video card (or video circuitry on the motherboard) has its own RAM memory just to hold the display information, and its own ROM BIOS to control the output. Some motherboards even have a special high-speed connection between the CPU and the video. It’s called the AGP, or Accelerated Graphics Port.
The important numbers in evaluating a video display are how many distinct colors can be displayed and also the resolution, which is how many pixels the image contains across and from top to bottom. Each dot of color making up the image is one pixel. As video technology evolved there have been a number of standards, and each one has its own set of initials like EGA, CGA or VGA. A common one is SVGA, which stands for Super Video Graphics Array and has a resolution of 800x600 (that’s 800 pixels across and 600 down). Some high-performance monitors use SXGA (1280x1024) or even UXGA with a resolution of 1600x1200.
More About Disk Drives
Floppies – Although floppy drives are being phased out in some new computers, there are still millions of them out there and you should know something about them. The floppy drive has a little slot on the face of the computer cabinet, and into this slot you can slide a floppy diskette like the one shown here. One of the reasons floppy drives are still around is that it is very easy to take a floppy diskette from one system to another.
Inside the floppy diskette is a round flat disk coated with iron oxide on each side so that data can be stored on it magnetically. This disk is called a platter, and it spins underneath an electro-magnet called the write head that puts data onto the platter surface. There is another head called the read head that copies data from the platter.
Once the disk has made one complete revolution, data is written all the way around. That is called a track. The head then moves a bit and writes another circle of data to create a second track. Altogether, there are 80 tracks on each side, for a total of 160. Altogether, the floppy can hold 1.44 MB (megabytes) of data.
If we are looking for just a few bytes out of 1.44 million, it’s not enough to know which track it is in. To help narrow the search, the track is divided into 18 pieces, called sectors, which look much like a slice of pie. Each sector holds 512 bytes of data, so if we know the track and sector number of the data we want it won’t be hard to find.
Hard Drives – On a hard drive, data is also organized into tracks and sectors. While each sector still holds 512 bytes, there can be many more tracks and sectors on a platter. There are also multiple platters, one on top of the other like a stack of pancakes. Hard drives can hold much more data than floppies, sometimes into the billions of bytes, called gigabytes (GB).

Multiple platters require multiple read and write heads, all attached to the same arm so they move together. It’s called an actuator arm. When we are reading track number 10 on the top platter, the other heads are also positioned over track 10 of the other platters, and together all of these track 10s make up a cylinder. To specify the location of data on a hard drive it is necessary to say what cylinder, then the track and sector. Moving the heads from one cylinder to another is called a seek, and the amount of time this takes is the average seek time.
Although hard drives can hold much more data than floppies, the platters are sealed into a metal case that is fastened inside the computer cabinet, so it’s not an easy matter to move from one system to another like you can with floppies. A hard drive is sometimes called a fixed disk for this reason.
Operating systems use a couple of different methods to keep track of what data is stored where on a drive. One common method uses a table called a File Allocation Table or FAT, which is a section of the disk with pointers to data locations. There are two versions, called FAT16 and FAT32. Windows NT, XP and 2000 use a similar method called NTFS.
There are two different interfaces commonly by hard drives to talk to the rest of the system. These are called IDE for Integrated Drive Electronics, and SCSI for Small Computer System Interconnect. The technical differences are not important at this point, but you should know about the two types because they are not interchangeable.
Figuring out where the heads should go next and then moving them there is the job of some electronic circuitry called the disk controller. Every disk drive has its own controller, which may be on the motherboard or inside the drive itself, depending on the type of drive.
There are a few more things you should know about disk drives before we leave the subject. The first sector of Cylinder 0, Track 0 is called the boot sector, and it contains a Master Boot Record (MBR) that shows whether the disk contains an operating system and the location of the code. If there is more than one operating system, the drive must be divided into multiple partitions. If not, then the whole drive will be a single partition. All of the disk space assigned to a partition is called a volume.
Another term you will encounter is a disk format. There is a high-level format, which creates a new file allocation table and is done with a FORMAT command. There is also a low-level format that creates a new pattern of sectors. A low-level format must be followed by an FDISK command to create a new Master Boot Record and partitions.
Last, we have the word media. This refers to the actual surface holding the data, which is the platter in the case of a disk drive. Because the floppy platter can be taken out of the drive, it is called removable media, while a hard drive is called fixed media.
Other Drives – Most systems today, especially home systems, have additional storage drives that use CD or DVD discs. The technology for both is similar but DVDs hold much more data. These drives do not store data magnetically but use optical markings that are read with a laser. They are mostly used just to read data and not to write it. The full name for CD in fact is CD-ROM, which stands for Compact Disc - Read Only Memory. However, there are versions that can be used to write also, and these are called CD-RW and DVD-RW. Even so they are mostly used to write just once for permanent storage, and are not practical for constantly changing data.
Like hard drives, CD-ROM drives can use either an IDE or SCSI interface. The version of IDE for CD-ROM drives is called ATAPI, and for SCSI the CD-ROM version is ASPI.
Because the discs can be removed, CD-ROM and DVD are considered removable media. There are other types of removable media also that are not as common, such as tape drives and Zip disks, which are similar to floppies but with a storage capacity of 100 or 250 MB. Zip disks and tape drives also use the ATAPI interface.
More About Memory
RAM memory is installed in the system on little circuit boards called modules that plug into the motherboard. This makes it very convenient to add more memory by plugging in another module. Older computers used a SIMM, which stands for Single Inline Memory Module, and later ones use a DIMM or Dual Inline Memory Module. The difference is that DIMMs have different signals on each side of the module connector, and the additional signals allow more memory addresses and more data lines going in and out.
The amount of memory is always is some multiple of two bytes. The most common values are 32, 64, 128, 256 or 512 megabytes.
As it is used by the system, RAM is divided into base memory and extended memory. Base memory is the first megabyte, and extended memory is everything over that. The very first PCs had only base memory, and then a scheme was developed called expanded memory that tricked the computer into allowing more than 1 MB of memory. Once extended memory was developed though, expanded memory quickly became obsolete and will only be found in older computers.
Another memory term you will encounter is cache memory. This refers to memory that is not on DIMMs but is either built into the CPU or connected directly to the motherboard near the CPU. It provides even faster access than RAM for the data that the CPU expects to need next. The contents of the cache will change constantly depending on what the CPU is doing.

A Brief History of the Computer (b.c. – 1993a.d.)

In The Beginning…
The history of computers starts out about 2000 years ago, at the birth of the abacus, a wooden rack holding two horizontal wires with beads strung on them. When these beads are moved around, according to programming rules memorized by the user, all regular arithmetic problems can be done. Another important invention around the same time was the Astrolabe, used for navigation. Blaise Pascal is usually credited for building the first digital computer in 1642. It added numbers entered with dials and was made to help his father, a tax collector. In 1671, Gottfried Wilhelm von Leibniz invented a computer that was built in 1694. It could add, and, after changing some things around, multiply. Leibniz invented a special stepped gear mechanism for introducing the addend digits, and this is still being used. The prototypes made by Pascal and Leibniz were not used in many places, and considered weird until a little more than a century later, when Thomas of Colmar (A.K.A. Charles Xavier Thomas) created the first successful mechanical calculator that could add, subtract, multiply, and divide. A lot of improved desktop calculators by many inventors followed, so that by about 1890, the range of improvements included:
Accumulation of partial results
Storage and automatic reentry of past results (A memory function)
Printing of the results
Each of these required manual installation. These improvements were mainly made for commercial users, and not for the needs of science.
Babbage
While Thomas of Colmar was developing the desktop calculator, a series of very interesting developments in computers was started in Cambridge, England, by Charles Babbage (left, of which the computer store “Babbages, now GameStop, is named), a mathematics professor. In 1812, Babbage realized that many long calculations, especially those needed to make mathematical tables, were really a series of predictable actions that were constantly repeated. From this he suspected that it should be possible to do these automatically.
He began to design an automatic mechanical calculating machine, which he called a difference engine. By 1822, he had a working model to demonstrate with. With financial help from the British government, Babbage started fabrication of a difference engine in 1823. It was intended to be steam powered and fully automatic, including the printing of the resulting tables, and commanded by a fixed instruction program. The difference engine, although having limited adaptability and applicability, was really a great advance. Babbage continued to work on it for the next 10 years, but in 1833 he lost interest because he thought he had a better idea — the construction of what would now be called a general purpose, fully program-controlled, automatic mechanical digital computer. Babbage called this idea an Analytical Engine. The ideas of this design showed a lot of foresight, although this couldn’t be appreciated until a full century later. The plans for this engine required an identical decimal computer operating on numbers of 50 decimal digits (or words) and having a storage capacity (memory) of 1,000 such digits. The built-in operations were supposed to include everything that a modern general – purpose computer would need, even the all important Conditional Control Transfer Capability that would allow commands to be executed in any order, not just the order in which they were programmed. The analytical engine was soon to use punched cards (similar to those used in a Jacquard loom), which would be read into the machine from several different Reading Stations. The machine was supposed to operate automatically, by steam power, and require only one person there. Babbage’s computers were never finished. Various reasons are used for his failure. Most used is the lack of precision machining techniques at the time. Another speculation is that Babbage was working on a solution of a problem that few people in 1840 really needed to solve. After Babbage, there was a temporary loss of interest in automatic digital computers. Between 1850 and 1900 great advances were made in mathematical physics, and it came to be known that most observable dynamic phenomena can be identified by differential equations(which meant that most events occurring in nature can be measured or described in one equation or another), so that easy means for their calculation would be helpful. Moreover, from a practical view, the availability of steam power caused manufacturing (boilers), transportation (steam engines and boats), and commerce to prosper and led to a period of a lot of engineering achievements. The designing of railroads, and the making of steamships, textile mills, and bridges required differential calculus to determine such things as:
center of gravity
center of buoyancy
moment of inertia
stress distributions
Even the assessment of the power output of a steam engine needed mathematical integration. A strong need thus developed for a machine that could rapidly perform many repetitive calculations.
Use of Punched Cards by Hollerith
A step towards automated computing was the development of punched cards, which were first successfully used with computers in 1890 by Herman Hollerith (left) and James Powers, who worked for the US. Census Bureau. They developed devices that could read the information that had been punched into the cards automatically, without human help. Because of this, reading errors were reduced dramatically, work flow increased, and, most importantly, stacks of punched cards could be used as easily accessible memory of almost unlimited size. Furthermore, different problems could be stored on different stacks of cards and accessed when needed. These advantages were seen by commercial companies and soon led to the development of improved punch-card using computers created by International Business Machines (IBM), Remington (yes, the same people that make shavers), Burroughs, and other corporations. These computers used electromechanical devices in which electrical power provided mechanical motion — like turning the wheels of an adding machine. Such systems included features to:
feed in a specified number of cards automatically
add, multiply, and sort
feed out cards with punched results
As compared to today’s machines, these computers were slow, usually processing 50 – 220 cards per minute, each card holding about 80 decimal numbers (characters). At the time, however, punched cards were a huge step forward. They provided a means of I/O, and memory storage on a huge scale. For more than 50 years after their first use, punched card machines did most of the world’s first business computing, and a considerable amount of the computing work in science.
Electronic Digital Computers
The start of World War II produced a large need for computer capacity, especially for the military. New weapons were made for which trajectory tables and other essential data were needed. In 1942, John P. Eckert, John W. Mauchly (left), and their associates at the Moore school of Electrical Engineering of University of Pennsylvania decided to build a high – speed electronic computer to do the job. This machine became known as ENIAC (Electrical Numerical Integrator And Calculator) The size of ENIAC’s numerical “word” was 10 decimal digits, and it could multiply two of these numbers at a rate of 300 per second, by finding the value of each product from a multiplication table stored in its memory. ENIAC was therefore about 1,000 times faster then the previous generation of relay computers. ENIAC used 18,000 vacuum tubes, about 1,800 square feet of floor space, and consumed about 180,000 watts of electrical power. It had punched card I/O, 1 multiplier, 1 divider/square rooter, and 20 adders using decimal ring counters, which served as adders and also as quick-access (.0002 seconds) read-write register storage. The executable instructions making up a program were embodied in the separate “units” of ENIAC, which were plugged together to form a “route” for the flow of information.
These connections had to be redone after each computation, together with presetting function tables and switches. This “wire your own” technique was inconvenient (for obvious reasons), and with only some latitude could ENIAC be considered programmable. It was, however, efficient in handling the particular programs for which it had been designed. ENIAC is commonly accepted as the first successful high – speed electronic digital computer (EDC) and was used from 1946 to 1955. A controversy developed in 1971, however, over the patentability of ENIAC’s basic digital concepts, the claim being made that another physicist, John V. Atanasoff (left) had already used basically the same ideas in a simpler vacuum – tube device he had built in the 1930’s while at Iowa State College. In 1973 the courts found in favor of the company using the Atanasoff claim.
The Modern Stored Program EDC
Fascinated by the success of ENIAC, the mathematician John Von Neumann (left) undertook, in 1945, an abstract study of computation that showed that a computer should have a very simple, fixed physical structure, and yet be able to execute any kind of computation by means of a proper programmed control without the need for any change in the unit itself. Von Neumann contributed a new awareness of how practical, yet fast computers should be organized and built. These ideas, usually referred to as the stored – program technique, became essential for future generations of high – speed digital computers and were universally adopted.
The Stored – Program technique involves many features of computer design and function besides the one that it is named after. In combination, these features make very – high – speed operation attainable. A glimpse may be provided by considering what 1,000 operations per second means. If each instruction in a job program were used once in consecutive order, no human programmer could generate enough instruction to keep the computer busy. Arrangements must be made, therefore, for parts of the job program (called subroutines) to be used repeatedly in a manner that depends on the way the computation goes. Also, it would clearly be helpful if instructions could be changed if needed during a computation to make them behave differently.
Von Neumann met these two needs by making a special type of machine instruction, called a Conditional control transfer – which allowed the program sequence to be stopped and started again at any point – and by storing all instruction programs together with data in the same memory unit, so that, when needed, instructions could be arithmetically changed in the same way as data. As a result of these techniques, computing and programming became much faster, more flexible, and more efficient with work. Regularly used subroutines did not have to be reprogrammed for each new program, but could be kept in “libraries” and read into memory only when needed. Thus, much of a given program could be assembled from the subroutine library.
The all – purpose computer memory became the assembly place in which all parts of a long computation were kept, worked on piece by piece, and put together to form the final results. The computer control survived only as an “errand runner” for the overall process. As soon as the advantage of these techniques became clear, they became a standard practice.
The first generation of modern programmed electronic computers to take advantage of these improvements were built in 1947. This group included computers using Random – Access – Memory (RAM), which is a memory designed to give almost constant access to any particular piece of information. . These machines had punched – card or punched tape I/O devices and RAM’s of 1,000 – word capacity and access times of .5 Greek MU seconds (.5*10-6 seconds). Some of them could perform multiplications in 2 to 4 MU seconds.
Physically, they were much smaller than ENIAC. Some were about the size of a grand piano and used only 2,500 electron tubes, a lot less then required by the earlier ENIAC. The first – generation stored – program computers needed a lot of maintenance, reached probably about 70 to 80% reliability of operation (ROO) and were used for 8 to 12 years. They were usually programmed in ML, although by the mid 1950’s progress had been made in several aspects of advanced programming. This group of computers included EDVAC (above) and UNIVAC (right) the first commercially available computers.
Advances in the 1950’s
Early in the 50’s two important engineering discoveries changed the image of the electronic – computer field, from one of fast but unreliable hardware to an image of relatively high reliability and even more capability. These discoveries were the magnetic core memory and the Transistor – Circuit Element. These technical discoveries quickly found their way into new models of digital computers. RAM capacities increased from 8,000 to 64,000 words in commercially available machines by the 1960’s, with access times of 2 to 3 MS (Milliseconds). These machines were very expensive to purchase or even to rent and were particularly expensive to operate because of the cost of expanding programming. Such computers were mostly found in large computer centers operated by industry, government, and private laboratories – staffed with many programmers and support personnel.
This situation led to modes of operation enabling the sharing of the high potential available. One such mode is batch processing, in which problems are prepared and then held ready for computation on a relatively cheap storage medium. Magnetic drums, magnetic – disk packs, or magnetic tapes were usually used. When the computer finishes with a problem, it “dumps” the whole problem (program and results) on one of these peripheral storage units and starts on a new problem. Another mode for fast, powerful machines is called time-sharing. In time-sharing, the computer processes many jobs in such rapid succession that each job runs as if the other jobs did not exist, thus keeping each “customer” satisfied. Such operating modes need elaborate executable programs to attend to the administration of the various tasks.
Advances in the 1960’s
In the 1960’s, efforts to design and develop the fastest possible computer with the greatest capacity reached a turning point with the LARC machine, built for the Livermore Radiation Laboratories of the University of California by the Sperry – Rand Corporation, and the Stretch computer by IBM. The LARC had a base memory of 98,000 words and multiplied in 10 Greek MU seconds. Stretch was made with several degrees of memory having slower access for the ranks of greater capacity, the fastest access time being less then 1 Greek MU Second and the total capacity in the vicinity of 100,000,000 words. During this period, the major computer manufacturers began to offer a range of capabilities and prices, as well as accessories such as:
Consoles
Card Feeders
Page Printers
Cathode – ray – tube displays
Graphing devices
These were widely used in businesses for such things as:
Accounting
Payroll
Inventory control
Ordering Supplies
Billing
CPU’s for these uses did not have to be very fast arithmetically and were usually used to access large amounts of records on file, keeping these up to date. By far, the most number of computer systems were sold for the more simple uses, such as hospitals (keeping track of patient records, medications, and treatments given). They were also used in libraries, such as the National Medical Library retrieval system, and in the Chemical Abstracts System, where computer records on file now cover nearly all known chemical compounds.
More Recent Advances
The trend during the 1970’s was, to some extent, moving away from very powerful, single – purpose computers and toward a larger range of applications for cheaper computer systems. Most continuous-process manufacturing, such as petroleum refining and electrical-power distribution systems, now used computers of smaller capability for controlling and regulating their jobs.
In the 1960’s, the problems in programming applications were an obstacle to the independence of medium sized on-site computers, but gains in applications programming language technologies removed these obstacles. Applications languages were now available for controlling a great range of manufacturing processes, for using machine tools with computers, and for many other things. Moreover, a new revolution in computer hardware was under way, involving shrinking of computer-logic circuitry and of components by what are called large-scale integration (LSI techniques.
In the 1950s it was realized that “scaling down” the size of electronic digital computer circuits and parts would increase speed and efficiency and by that, improve performance, if they could only find a way to do this. About 1960 photo printing of conductive circuit boards to eliminate wiring became more developed. Then it became possible to build resistors and capacitors into the circuitry by the same process. In the 1970’s, vacuum deposition of transistors became the norm, and entire assemblies, with adders, shifting registers, and counters, became available on tiny “chips.”
In the 1980’s, very large scale integration (VLSI), in which hundreds of thousands of transistors were placed on a single chip, became more and more common. Many companies, some new to the computer field, introduced in the 1970s programmable minicomputers supplied with software packages. The “shrinking” trend continued with the introduction of personal computers (PC’s), which are programmable machines small enough and inexpensive enough to be purchased and used by individuals. Many companies, such as Apple Computer and Radio Shack, introduced very successful PC’s in the 1970s, encouraged in part by a fad in computer (video) games. In the 1980s some friction occurred in the crowded PC field, with Apple and IBM keeping strong. In the manufacturing of semiconductor chips, the Intel and Motorola Corporations were very competitive into the 1980s, although Japanese firms were making strong economic advances, especially in the area of memory chips.
By the late 1980s, some personal computers were run by microprocessors that, handling 32 bits of data at a time, could process about 4,000,000 instructions per second. Microprocessors equipped with read-only memory (ROM), which stores constantly used, unchanging programs, now performed an increased number of process-control, testing, monitoring, and diagnosing functions, like automobile ignition systems, automobile-engine diagnosis, and production-line inspection duties. Cray Research and Control Data Inc. dominated the field of supercomputers, or the most powerful computer systems, through the 1970s and 1980s.
In the early 1980s, however, the Japanese government announced a gigantic plan to design and build a new generation of supercomputers. This new generation, the so-called “fifth” generation, is using new technologies in very large integration, along with new programming languages, and will be capable of amazing feats in the area of artificial intelligence, such as voice recognition.
Progress in the area of software has not matched the great advances in hardware. Software has become the major cost of many systems because programming productivity has not increased very quickly. New programming techniques, such as object-oriented programming, have been developed to help relieve this problem. Despite difficulties with software, however, the cost per calculation of computers is rapidly lessening, and their convenience and efficiency are expected to increase in the early future. The computer field continues to experience huge growth. Computer networking, computer mail, and electronic publishing are just a few of the applications that have grown in recent years. Advances in technologies continue to produce cheaper and more powerful computers offering the promise that in the near future, computers or terminals will reside in most, if not all homes, offices, and schools.

Important Steps to Protect your Computer from Hurricanes

Having lived in West Central Florida for the past 15 years, I've been given some insight into the sometimes scary reality of Mother Nature. This past summer I've had the displeasure of meeting four characters, first hand...Charley, Frances, Jeanne and Ivan. Yes, I'm talking about Hurricanes.
For all the advantages one has with personal computers or a high-tech home office setup, there are huge disadvantages to being plugged in during the approach of a serious storm: the loss of data can be devastating. While it's simple enough to log off, shut down and unplug at the first warning signs, you might want to take a few extra steps to preserve information that is vital to a business or the family archives. In the best of circumstances an ounce of prevention will result in countless returns. A little foresight can make the difference between having usable equipment or a pile of water-soaked junk.
1. Along with other valuable property, document what you own with a videotape or camera. Save copies of purchase receipts. Be sure the electric wiring in your home or business is properly grounded and that all voltage-sensitive equipment is grounded.
2. Battery backup: Purchase electronic equipment with a back-up battery or capacitor to retain settings should a momentary power disturbance occur. Consider purchasing protective equipment which can help against lethal storm and electrical conditions. Un-interruptible Power Supply (UPS) maintains power to critical loads during power outages.
3. Surge Protectors: Make sure the suppressor has 3-way protection and is UL (Underwriters Laboratory) listed for compliance with the 1449 TVSS (Transient Voltage Surge Suppressor) standard. Features of the plug-in type surge protector include multiple outlets, on/off switches, audible alarms, and indicator lights to let you know the suppressor is working, and connections for telephone or data cable lines.
4. Back up your computer's hard drive. Make duplicate copies of your files and store them in two separate locations such as a deposit box or home of a relative. Find safe harbor for your data. The best solution would be an online data backup service (also known as remote backup or offsite backup). This will give you the protection you need all year around.
5. Make an assessment of storage options for software and hardware equipment. Look for a central place in the building or home. Ideal location has no windows. The major cause of damage to computer hardware and software will be from rain and wind. Broken doors and windows will allow the wind with its rain and debris to blow through buildings. By moving computer equipment (i.e. monitors, CPUs, printers, keyboards) to protected locations and wrapping with plastic, the chances of damage will be greatly reduced. Double wrap equipment in plastic garbage bags to reduce rain/water damage. If equipment is to be located directly on the floor, take into consideration the possible effects of flooding. Set items on a table. Place equipment on or in water resistant objects, such as garbage cans.
6. Unplug all equipment including computers networked to other computers. As a major storm begins to pummel the area, the chances of severe power fluctuations are very high as electrical transmission lines and power plants are affected. These power fluctuations can have serious consequences on any equipment left plugged in or turned on.
7. After the storm. Be careful when reconnecting equipment to wall outlets and rebooting. If there is any indication that outlets, equipment or flooring has been exposed to water or moisture, wait until the equipment is thoroughly dried out - that might mean waiting a few days. To save expensive equipment, test outlets by plugging in an inexpensive lamp first to make sure the outlet is safe.
About the author: Sol Spencer helps computer users have the peace of mind that only a secure, online backup can provide. With Safe Harbor Data, you can restore your entire computer with one download! Amazingly affordable and effective, Safe Harbor protects your data with state-of-the-art encryption. Get the peace of mind that comes with secure, online backup today for only pennies each day.

Learn How Is Your Internet Privacy Is At Risk

Minimizing the risks related to the Internet security is of primary concern for any online business site. Internet security is very important and must be guarded severely at all costs. Minimizing the risks related to online security will ensure that you will be able to attract many customers to your online sites. Many security measures can be installed in an online site for lessening the risk of Internet security.
If the customers are not sure about the security of their personal details and financial statements, they will never conduct online business. Internet privacy security is very important for any online business site.
Internet privacy is at risk due to the presence of different elements. The presence of spyware is one factor of risk for Internet privacy security. The spyware that is present in your computer can track your online behavior. Spyware software is enabled with the advanced features that allow the spyware manufacturers to surreptitiously track the actions of a computer user. The information gathered through this process can be used to commit frauds and other illegal activities.
The cookies that are deposited in your computer when you visit different sites can also pose a risk to your Internet privacy security. Cookies are data that is sent from a website to be stored in your computer. The cookies of the different websites can be used to track the user's activities for a particular span of time. If the information falls into wrong hands many illegal activities can take place as a result. With the advancement in technology, it is very natural to be worried about online privacy and security.
A person with a criminal intention is always on the look out for ways and means to invade Internet privacy security of the people. If he can get information about a person's bank details and other personal details, he can misuse them. The person can assume your identity online and deal with your bank or other agencies in your capacity. The victim may be completely unaware about the fraud that is taking place in his name. This can lead to the huge losses to the person whose privacy has been invaded.
You will have to adopt various means to safe guard your Internet privacy security. Installing a spyware in your computer can be one option for you to safe guard your privacy. The software will efficiently remove all traces of the presence of any kind of spyware from your computer. If it is difficult to remove all spyware installed in your computer, seek online advice on the manual removal of such spyware.
Imagine yourself in a situation where someone else is able to monitor every move that you make. This is a terrifying situation to face. The best way for you to escape such a situation is to install the best security features in your computer. You will then be able to surf online peacefully without constantly worrying about your Internet privacy security.

The history of computer

The early computers
The history of computer dates back a lot longer than the 1900s, in fact computers have been around for over 5000 years.
In ancient time a "computer", (or "computor") was a person who performed numerical calculations under the direction of a mathematician.
Some of the better known devices used are the Abacus or the Antikyt hera mechanism.
Around 1725 Basile Bouchon used perforated paper in a loom to establish the pattern to be reproduced on cloth. This ensured that the pattern was always the same and hardly had any human errors.
Later, in 1801, Joseph Jacquard (1752 - 1834), used the punch card idea to automate more devices with great success.
The First computers?
Charles Babbage's. (1792-1871), was ahead of his time, and using the punch card idea he developed the first computing devices that would be used for scientific purposes. He invented the Charles Babbage's Difference Engine, which he begun in 1823 but never completed. Later he started work on the Analytical Engine, it was designed in 1842.
Babbage was also credited with inventing computing concepts such as conditional branches, iterative loops and index variables.
Many people improved on the Babbage inventions, George Scheutz along with his son, Edvard Scheutz, began work on a smaller version and by 1853 they had constructed a machine that could process 15-digit numbers and calculate fourth-order differences.
On of the first notable commercial use, (and success), of computers was the US Census Bureau, which used punch-card equipment designed by Herman Hollerith to tabulate data for the 1890 census.
To compensate for the cyclical nature of the Census Bureau's demand for his machines, Hollerith founded the Tabulating Machine Company (1896), which was one of three companies that merged to form IBM in 1911.
Later, Claude Shannon (1916- 2001) first suggested the use of digital electronics in computers and in 1937 and J.V.Atanasoff built the first electronic computer that could solve 29 simultaneous equations with 29 unknowns. But this device was not programmable
During those trouble times, computers evolved at a rapid rate. But because of restrictions many projects remained secret until much later and notable example is the British military "Colossus" developed in 1943 by Alan Turing and his team.
In the late 1940 the US army commissioned John V. Mauchly to develop a device to compute ballistics during World War II. As it turned out the machine was only ready in 1945, but the Electronic Numerical Integrator and Computer, or ENIAC, proved to be a turning point in computer history.
ENIAC proved to be a very efficient machine but not a very easy one to operate. Any changes would sometime require the device itself to be re-programmed. The engineers were all too aware of this obvious problem and they developed "stored program architecture".
John von Neumann, (a consultant to the ENIAC), Mauchly and his team developed EDVAC, this new project used stored program.
Eckert and Mauchly later developed what was arguably the first commercially successful computer, the UNIVAC.
Software technology during this period was very primitive. The first programs were written out in machine code. By the 1950s programmers were using a symbolic notation, known as assembly language, then hand-translating the symbolic notation into machine code. Later programs known as assemblers performed the translation task.
The Transistor era, the end of the inventor.
Late 1950 saw the end of valve driven computers. Transistor based computers were used because they were smaller, cheaper, faster and a lot more reliable.
Corporations, rather than inventors, were now producing the new computers.
Some of the better known ones are:
--TRADIC at Bell Laboratories in 1954,
--TX-0 at MIT's Lincoln Laboratory
--IBM 704 and its successors, the 709 and 7094. The latter introduced I/O processors for better throughput between I/O devices and main memory
--First supper computers, The Livermore Atomic Research Computer (LARC) and the IBM 7030 (aka Stretch)
--The Texas Instrument Advanced Scientific Computer (TI-ASC)
Now the basis of computers was in place, with transistors the computers were faster and with Stored program architecture you could use the computer for almost anything.
New high level programs soon arrived, FORTRAN (1956), ALGOL (1958), and COBOL (1959), Cambridge and the University of London cooperated in the development of CPL (Combined Programming Language, 1963). Martin Richards of Cambridge developed a subset of CPL called BCPL (Basic Computer Programming Language, 1967).
In 1969, the CDC 7600 was released, it could perform 10 million floating point operations per second (10 Mflops).
The network years.
From 1985 onward the race was on to put as many transistors as possible on one computer. Each one of them could do a simple operation. But apart from been faster and been able to perform more operations the computer has not evolved much.
The concept of parallel processing is more widely used from the 1990s.
In the area of computer networking, both wide area network (WAN) and local area network (LAN) technology developed at a rapid pace
Get a more detailed history of computer on our website.http://mycomputersciences.blogspot.com/
Gives you information from the history of computer to what computer memory to get. Computer software as well as everything you need to know about computer hardware. All in simple terms for the non-technical amongst us.

Computer Books




















Monday, June 14, 2010

Top 10 keyboard shortcuts everyone should know

Using keyboard shortcuts can often cut the time it takes to do something on a computer in half. Below are our top 10 keyboard shortcuts we recommend everyone memorize and use.
Ctrl + C or Ctrl + Insert
Copy the highlighted text or selected item.
Ctrl + V or Shift + Insert
Paste the text or object that's in the clipboard.
Ctrl + Z and Ctrl + Y
Undo any change. For example, if you cut text, pressing this will undo it. This can also often be pressed multiple times to undo multiple changes. Pressing Ctrl + Y would re-do the undo.
Ctrl + F
Open the Find in any program. This includes your Internet browser to find text on the current page.
Alt + Tab or Alt + Esc
Quickly switch between open programs.
F1
Open help for the program you're in.
Ctrl + P
Print what's currently being viewed in programs such as Microsoft Word or your Internet browser.
Ctrl + Left arrow / Right arrow
Move the cursor one word at a time instead of one character at a time. If you wanted to highlight one word at a time you can hold down Ctrl + Alt and then press the left or right arrow key to move one word at a time in that direction while highlighting each word.
Ctrl + Home / End
Pressing either the page up or page down key will move that page one page at a time in that Move the cursor to the beginning or end of a document.
Page Up / Space bar and Page Down
direction. When browsing the Internet pressing the space bar will also move the page down one page at a time.
Computer tips home - Hardware tips - Top 10 tips

Top 10 free PC programs everyone should have

There are millions of free and open source projects available, many of them better than any commercially available product. Below is a short listing of what we think is the best out there, broken down into ten categories.
Anti-virus and malware protection
Most PC users realize that they need some type of protection on their computer or may have an installed anti-virus program from their computer manufacturer. What most don't realize is that there are free programs that are just as good and in some cases better than the commercial products. Below are our recommendations
Anti-virus program: Avast! or AVG
Malware / Spyware protection: Malwarebytes
Backup solutions
There are dozens of free and commercially available backup programs for computers. Unfortunately many of those backups are stored locally, meaning if your house were to catch fire, get robbed, or if you simply lost your backup discs all your data would be lost. This is why when dealing with important data we suggest users use online backup services.
Online backup solution: Mozy ** Free 2GB of online backup for personal use
Browsers
Although Microsoft Internet Explorer comes pre-installed on Windows computers. There are several excellent free alternatives that everyone should try. These free alternatives can often be faster, have more options, and in many cases be more secure than Internet Explorer.
Internet Browser: Mozilla Firefox or Google Chrome
Compression utility
When downloading files on the Internet you'll eventually encounter a .zip, .rar, or other compressed file. Dealing with these files can be easy with our below free file compression utility.
File compression utility: 7-zip
Disc ripper and creation utility
Creating an audio or data CD/DVD, ripping the data from an audio CD, or creating a CD from a .ISO file can also be done freely using our below free recommendation.
CD burner / ripper utility: CDBurnerXP
E-mail
E-mail is yet another service that can be done freely. Most users today use online e-mail solutions like the one listed below. However, for those still using an e-mail client such as Microsoft Outlook we strongly suggest one or both of the below suggestions.
E-mail client: Mozilla Thunderbird
Online e-mail: Gmail
FTP, SFTP, and SSH Utility
Users who maintain their own web page or need to upload / download files to or from a server will have to use an FTP utility and/or a SSH client. There are many commercial programs capable of doing this but our below free recommendations beats them all.
FTP client: Filezilla
SSH client: Putty
Image editor, paint program, and picture organizer
There are many great free solutions for editing, creating, and organizing your images on your computer. Many of the alternative programs capable of doing these types of tasks can be several hundred dollars, but all of the below programs are completely free.
Image editor: GIMP
Paint program: Paint.net
Picture organizer: Google Picasa
Multimedia
There are dozens of different multimedia programs with different capabilities and limitations. Below are our top free multimedia programs for watching video files and recording audio.
Audio editing and creating tool: Audacity
Video and DVD Player: VLC
Office Suite
An Office suite such as Microsoft Office is often one of the most expensive programs that a user can install on their computer. Why install these expensive programs when there are free solutions that are just as good.
Office suite: OpenOffice
Notepad / Source code editor: Notepad++
Computer tips home - Top 10 tips

This years monthly computer tips

Below is a listing of monthly computer tips that have been listed on Computer Hope over the last year. A complete list of computer tips are found on our computer tips page.
6/2010 - Eliminate most if not all spamRelated Tips: Internet tips
Eliminate most if not all the spam e-mail you receive by using Google Gmail as an e-mail filter. Gmail has one of the best if not the best spam filtering systems and can be used to filter your e-mails even if you're not using it as your primary e-mail client. We were successfully able to block 99% of all spam we receive daily using Gmail as our filter. See our tip133 page for steps on how to do this.
05/2010 - Internet browsersRelated Tips: Windows tips
If you've visited a web page in the past but forgot to bookmark it when you were there, that page can be quickly and easily found by searching your browser history. To search your Internet browsers history press CTRL + H or Open Apple + H to open the browsers history. Once in the browser history window type a keyword that you remember about the page. For example, searching for computer would find Computer Hope and any other computer related pages you've recently visited.
04/2010 - Windows 7 and spring cleaning tipsRelated Tips: Windows tips
Windows 7 tip
Quickly and easily create a Microsoft Windows 7 repair disc that can be used in the event your computer encounters errors and is not able to boot. To do this click Start and in the search line type system repair and in the Start menu click the Create a System Repair Disc shortcut to start the process of creating the disc.
Spring cleaning time
Did you know that your computer keyboard and mouse could be one of the most germ-infected items in your house, often having more bacteria than your toilet seat on it. If you haven't cleaned your computer recently start spring right with cleaning your computer and its components. See our computer cleaning help page for additional help and information with cleaning your computer.
03/2010 - Facebook top 10 tipsRelated Tips: Top 10 tips
This month we're covering our top 10 Facebook tips, see our Facebook top 10 tips page for the full listing of these tips.
02/2010 - Keyboard shortcutsRelated Tips: General hardware tips
Using keyboard shortcuts can often cut the time it takes to do something on a computer in half. We highly recommend each of our visitors take a few minutes to review and memorize our top 10 keyboard shortcuts everyone should know.
01/2010 - Free information through the phoneRelated Tips: Miscellaneous tips
Each time you dial 411 for information you phone bill is automatically charged. Instead of using this service use Google's 411 service: 1-800-GOOG-411 to look up an address or phone number and have Google text you the information or forward you to the number. Other services such as ChaCha: 1-800-2CHACHA allow you to ask any question imaginable and have the answer texted back to you for free. Finally, Free 411: 1-800-FREE-411 and Tellme: 1-800-555-8355 are other free services that provide methods of getting free information as well as things such as the latest news, stock quotes, movies, etc.
New years resolution e-mail
Setting new goals this year for New Years? Why not compose an e-mail to be sent to you at the first of 2011 using futureme.org. Not only is it fun way to see how well you did on your goals.
12/2009 - What to do on the Internet when boredRelated Tips: Internet tips
We often get requests for people looking for things to do on the Internet or claim they're bored on the Internet. This month we'd like to mention document CH000721, which has several dozen links of the best places on the Internet. Simply visiting each of the links on this page is sure to give anyone plenty of things to do and will likely introduce you to the best places to visit on the Internet.
11/2009 - Favorite Windows 7 tipsRelated Tips: Microsoft Windows
With Windows 7 officially being released to the public we thought we'd list our top favorite Windows 7 tip pages.
· View two windows next to each other using Smart Window
· Open recent items using the new Jump List
· Pin items to your Taskbar
· Record any computer problems with the new Problem Steps Recorder
· Quickly run and find programs using the Windows Search
· Run Resmon to get full information about system performance
· Easily preview open Taskbar items
10/2009 - Firefox tabsRelated Tips: Firefox tips
Have all your favorite pages open in tabs each time you open the browser by following the below steps.
Open Firefox and all the tabs you wish to have open each time you open the browser.
Click Tools and then Options.
Within Options click the Main option and then click the "Use Current Pages" button, this will separate each URL with a pipe and will then open each of these tabs each time you open the browser.
Click Ok and the next time you open your browser each tab should also open.
9/2009 - iGoogleRelated Tips: Internet tips
Set your default homepage to iGoogle. A fantastic service from Google that enables users to have all relevant information they're interested in on their home page. Customizing this page you can set such settings as displaying your local weather, stocks, news, Facebook page, Twitter page, RSS feeds from your most popular pages, movies, and much more all on one page. To access this feature follow the below steps.
Open the main Google page.
In the top right portion of the Windows click the iGoogle link. Note: This link will not be visible unless you're logged into Google.
Once you've customized your own personalized iGoogle page simply set your home page as the iGoogle link or if you like the service but don't want it as your home page bookmark it. Information about changing your browser home page can be found on document CH000577.
8/2009 - Windows VistaRelated Tips: Microsoft Windows
Quickly see past problems encountered by Windows Vista and any solutions to those problems by clicking start and typing problem reports and solutions and press enter. In addition to finding solutions to problems this will also allow you to see a complete history of problems reported on the computer. See our Problem Reports and Solutions definition for an example of this screen and related links.
7/2009 - Free anti-virusRelated Tips: Microsoft Windows
Keep your computer safe and do it freely. Today, with the wide variety of free anti-virus programs there is no need to pay for an anti-virus scanner. Save yourself some money and uninstall the anti-virus program you're using and install one of the below free programs, which are just as good and wont expire on you.
· Free AVG
· Free Avast
6/2009 - InternetRelated Tips: Internet tips
Concerned about the safety of web pages you or others are visiting on your computer? Consider installing the free browser add-on WOT (Web of Trust), when installed this free add-on will display a large warning across the window of any web page that has been poorly rated, contains adware, been known to fraudulently charge visitors, contains malware, and/or is otherwise unsafe. This add-on can be downloaded from their web page.
Latest tips delivered to your e-mail Computer tips home

My computer reboot during a BIOS update

1:Question:
My computer reboot during a BIOS update.
Answer:
If your computer freezes or reboots while a BIOS update is being written unfortunately this can corrupt your computers Flash BIOS causing your computer to no longer boot properly.
Reset the BIOS
Because the actual BIOS is corrupted it must either be reset or replaced. With some computer motherboards it may be possible to restore the default BIOS settings using a jumper on the motherboard. Refer to the computer manufacturer or motherboard manufacturer manual to see if this is possible. Often the jumper will be labeled as Reset BIOS.
Note: This should not be confused with the reset CMOS jumper as it only resets your stored CMOS values stored in the CMOS battery and not the actual flash BIOS. Resetting the CMOS with the Reset CMOS jumper or removing the battery and putting it back into the computer will not resolve this issue.
Replace BIOS
If your unable to reset your BIOS or your motherboard does not have this jumper contact the computer manufacturer or motherboard manufacturer for further suggestions and/or a replacement BIOS chip.

Computer keyboard shortcut keys

  1. Quick links
    Shortcut keys ABCsBasic
  2. Basic PC shortcut keys
  3. PC shortcut keysF1 - F12 function keys
  4. Top 10 keyboard shortcuts
  5. Linux / Unix shortcut keys
  6. Macintosh and Apple shortcut keys
  7. Microsoft Windows shortcuts and windows keys
  8. Microsoft Excel shortcut keys
  9. Microsoft Word shortcut keys
  10. Microsoft Internet Explorer shortcut keys
  11. Microsoft FrontPage shortcut keys
  12. Microsoft Outlook shortcut keys
  13. Mozilla FirefoxKeyboard terms
  14. How do I create a Windows shortcut key?
    Shortcut keys ABCs
    Shortcut keys help provide an easier and usually quicker method of navigating and using computer software programs. Shortcut keys are commonly accessed by using the Alt (on IBM compatible computers), command key (on Apple computers), Ctrl, and/or Shift in conjunction with a single letter. The de facto standard for listing a shortcut is listing the modifier key, a plus symbol, and the single character. Or in other words, "ALT+S" is telling you to press the Alt key and while continuing to hold the Alt key, press the S key to perform the shortcut.
    In addition to the shortcuts listed on this page, users can find the shortcut keys to their most popular program by looking for underlined letters in their menus. For example, in the picture to the right you'll can notice that the "F" in File has been underlined. You will then know that you can press the Alt key and F to access the File menu (Note: Some programs require the user press and hold ALT to see the underlined characters). Finally, as can also be seen some of the common features such as Open (Ctrl+O) and Save (Ctrl+S) have shortcut keys assigned to them.
    As you begin to work with shortcut keys you will notice that several applications share the same shortcut keys. We have listed many of these keys in our basic PC shortcut keys section.
    Note: Users outside the United States or users using a foreign copy of a Microsoft Windows or Microsoft application may not be able to get all the below shortcut keys to perform the function listed below.
    Basic PC shortcut keys
    The below basic shortcut keys are a listing of shortcut keys that will work with almost all IBM compatible computers and software programs. It is highly recommended that all users keep a good reference of the below short cut keys and/or try to memorize the below keys. Doing so will dramatically increase your productivity.

Shortcut Keys Description
Alt + F File menu options in current program.
Alt + E Edit options in current program
F1 Universal Help in almost every Windows program.
Ctrl + A Select all text.
Ctrl + X Cut selected item.
Shift + Del Cut selected item.
Ctrl + C Copy selected item.
Ctrl + Ins Copy selected item
Ctrl + V Paste
Shift + Ins Paste
Home Goes to beginning of current line.
Ctrl + Home Goes to beginning of document.
End Goes to end of current line.
Ctrl + End Goes to end of document.
Shift + Home Highlights from current position to beginning of line.
Shift + End Highlights from current position to end of line.
Ctrl + Left arrow Moves one word to the left at a time.
Ctrl + Right arrow Moves one word to the right at a time.

Cleaning the computer and its components

  1. Introduction
  2. How often should I clean my computer?
  3. General cleaning tips
  4. Cleaning tools
  5. Case cleaning
  6. CD-ROM / other disc drive cleaning
  7. CD / DVD cleaning
  8. Floppy drive cleaning
  9. Hard Disk Drive cleaning
  10. Headphones cleaning
  11. Keyboard cleaning
  12. Laptop cleaning
  13. LCDcleaning
  14. Monitor cleaning
  15. Motherboard cleaning
  16. Mouse cleaning
  17. Palm Pilot cleaning
  18. Printer cleaning
  19. Scanner cleaning
  20. SuperDisk cleaning

1:Introduction
Cleaning your computer and your computer components and peripherals helps keep the components and computer in good working condition and helps keep the computers from spreading germs. To the right is an example image of how dirty the inside of your computer case can get. This example is a dirty computer case fan.
Depending on the environment that your computer operates in determines how often you should clean your computer case. The below list is our recommendation and may change depending upon your computer's environment.

2:How often should I clean my computer?
The frequency of how often you should clean your computer varies on several different factors. To help you determine how often you need to clean your computer we've created the below chart, check each of the boxes below that apply to your computers environment to see how often to clean your computer.


Where is computer located?

In a home environment
In a clean office environment
In construction / industry environment
In school environment
Computer environment
Have cat / dog in same building as computer
Smoke in same building as computer
Smoke next to computer
Computer is on floor
Room that the computer is in has carpet
Eat and/or drink by computer
Who uses it?
Adult (18 and older)
Young adults (ages 10-18) use computer
Pre-teen (younger than 10) use computer
More than one person uses computer
Based off what has been checked above you should be cleaning your computer every ( 11 ) months.

  • 3:General cleaning Tips
    Below is a listing of general tips that should be taken when cleaning any of the components or peripherals of a computer as well as tips to help keep a computer clean.
    1:Never spray or squirt any type of liquid onto any computer component. If a spray is needed, spray the liquid onto a cloth and then use that cloth to rub down the component.
    2: Users can use a vacuum to suck up dirt, dust, or hair around their computer on the outside case and on their keyboards. However, do not use a vacuum for the inside of your computer as it generates a lot of static electricity that can damage the internal components of your computer. If you need to use a vacuum to clean the inside of your computer, use a portable battery powered vacuum designed to do this job.
    3: When cleaning a component and/or the computer, turn it off before cleaning.
    4: Never get any component inside the computer or any other circuit board damp or wet.
    5: Be cautious when using any type of cleaning solvents; some individuals may have allergic reactions to chemicals in cleaning solvents and some solvents can even damage the case. Try to always use water or a highly diluted solvent.
    6: When cleaning, be careful not to accidentally adjust any knobs or controls. In addition, when cleaning the back of the computer, if anything is plugged in, make sure not to disconnect any of the plugs.
    7: When cleaning fans, especially the smaller fans within a portable computer or laptop it's suggested that you either hold the fan or place something in-between the fan blades to prevent it from spinning. Spraying compressed air into a fan or cleaning a fan with a vacuum may cause damage to some fans or in some cases cause back voltage.
    8: Never eat or drink around the computer.
    9: Limit smoking around the computer.

4:Cleaning tools
Although many companies have created products to help improve the process of cleaning your computer and peripherals, users can also use household items to clean their computers and peripherals. Below is a listing of items you may need or want to use while cleaning your computer or computer peripherals.
Keep in mind that some components in your computer may only be able to be cleaned using a product designed for cleaning that component; if this is the case, it will be mentioned in the cleaning tips.
· Cloth - A cloth is the best tool used when rubbing down a component; although paper towels can be used with most hardware, we recommend using a cloth when ever possible. Caution: We only suggest you use a cloth when cleaning components such as the outside of the case, a drive, mouse, etc. You should not use a cloth to clean any circuitry such as the RAM or motherboard since they can generate
ESD that can damage electronics.
· Water or rubbing alcohol - When moistening a cloth, it is best to use water or rubbing alcohol. Other solvents may be bad for the plastics used with your computer.
· Portable Vacuum - Sucking the dust, dirt, hair, cigarette particles, and other particles out of a computer can be one of the best methods of cleaning a computer. Over time, these items can restrict the airflow in a computer and cause circuitry to corrode. Do not use a standard vacuum as it can generate a lot of static electricity that can damage your computer.
· Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are excellent tools for wiping hard to reach areas in your keyboard, mouse, and other locations.
· Foam swabs - Whenever possible, it is better to use lint-free swabs such as foam swabs.

5:Case cleaning
Why? Keeps the appearance of the computer looking new. During cleaning, if ventilation locations are found, these can be cleaned helping the case keep a steady airflow to the computer, keeping components cool and in good working condition.
Procedure: The plastic case that houses the PC components can be cleaned with a lint-free cloth that has been slightly dampened with water. For stubborn stains, add a little household detergent to the cloth. It is recommended that you never use a solvent cleaner on plastics.
Make sure all vents and air holes are hair and lint free by rubbing a cloth over the holes and vents. It is also helpful to take a vacuum around each of the hole, vents, and crevices on the computer. It is safe to use a standard vacuum when cleaning the outside vents of a computer; however, if you need to clean the inside of the computer, use a portable battery powered vacuum to prevent static electricity.
If you are looking for steps on cleaning the inside of the computer, please see our motherboard cleaning section.

6:CD-ROM or other disc drive cleaning
Why? A dirty CD-ROM drive or other disc drive can cause read errors with CD discs. These read errors could cause software installation issues or issues while running the program.
Procedure: To clean the CD-ROM drive we recommend purchasing a CD-ROM cleaner from your local retailer such as a local Radio Shack. Using a CD-ROM cleaner should sufficiently clean the CD-ROM laser from dust, dirt, and hair.
In addition to cleaning the drive with a special disc designed to clean drives users can also use a cloth dampened with water to clean the tray that ejects from the drive. Make sure however that after the tray has been cleaned that it completely dry before putting the tray back into the drive.
Also see our CD cleaning recommendation for steps on cleaning each of your CDs.
Additional help: CD-ROM Page

7:CD / DVD cleaning
Why? Dirty CDs can cause read errors and/or cause CDs to not work at all.
Procedure: Cleaning CDs and DVDs should be done with a cleaning kit but can also be done with a normal clean cotton cloth or shirt. When doing this with a clean cotton cloth or shirt, wipe against the tracks, starting from the middle of the CD or DVD and wiping towards the outer side as shown in the below picture. Never wipe with the tracks; doing so may put more scratches on the disc.
It is recommended when cleaning a CD that water is used. However, if the substance on a CD cannot be removed using water, pure alcohol can also be used.
Additional help: CD-ROM Page

8:Floppy drive cleaning
Why? Dirty read/write heads on the floppy drive can cause errors during the reading and/or writing process.
Procedures: The floppy drive can be cleaned two different ways. The first method of cleaning a floppy drive, and our recommended method, is to purchase a kit at your local retail store designed to clean the read/write heads on your floppy drive.
The second method of cleaning the floppy drive is only recommended for experienced computer users. Open the floppy drive casing and physically swab the read/write heads with a lint-free foam swab soaked in pure alcohol, free-on, or trichloroethane. When performing these steps, be extremely careful when cleaning the heads to ensure that you do not lock them out of alignment causing the floppy drive to not work. To help prevent the heads from becoming out of alignment, use a dabbing motion lightly putting the swab on the head and removing it, do not perform a side-to-side motion with the swab.
Additional help: Floppy Drive Page

9:Hard disk drive cleaning
Why? While hard drives cannot be cleaned physically, they can be cleaned with various utilities on the computer to help it run fast and more efficiently. Utilizing these utilities will prevent the hard drive from slowing down.
Procedure: Refer to our basic troubleshooting section for your operating system for steps that can be done to help improve the performance of your computer.
Additional help: Hard Disk Drive Page

10:Headphones cleaning
Why? Headphones that are used by multiple people may need to be cleaned frequently to help prevent the spreading of germs and head lice.
Procedure: If the headphones being used are plastic and/or vinyl, moisten a cloth with warm water and rub the head and earpieces of the headphones. As mentioned earlier in our cleaning tips, it is recommended that if your headphones are being used for a library or school that you do not use any type of disinfectant or cleaning solvent as users may have allergic reactions to the chemicals they contain.
Headphones that have cushions also have the availability of having the cushions replaced. Replacing these cushions can also help keep the headphones clean.
Finally, in regards to headphones and the spreading of head lice, if multiple students are using your headphones, you should consider having the students use their own headphones, using bags that are placed over the headphones, or having headphones that can be wiped with warm water after each student has used the headphones.

11:Keyboard cleaning
If you're trying to clean a laptop keyboard see document CH000780 for additional help and information. All of the below information applies to standard desktop computer keyboards.
Dust, dirt, and bacteria
The computer keyboard is often the most germ infected items in your home or office, often it will contain more bacteria than your toilet seat. Cleaning it can help remove any dangerous bacteria. Dirt, dust and hair can also build up causing the keyboard to not function properly.
Procedure: Before cleaning the keyboard first turn off the computer or if you're using a USB keyboard simply unplug it. Not unplugging the keyboard can result in causing other computer problems as you may press keys that cause the computer to perform a task you don't want it to do.
Many people clean the keyboard by turning it upside down and shaking. A more effective method is to use compressed air. Compressed air is pressurized air contained in a can with a very long nozzle. Simply aim the air between the keys and blow away all of the dust and debris that has gathered there. A vacuum cleaner can also be used, but make sure the keyboard doesn't have loose "pop off" keys that could possibly be sucked up by the vacuum.
If you wish to clean the keyboard more extensively you'll need to remove the keys from the keyboard. Additional information about doing this is found on document CH001241.
After the dust, dirt, and hair has been removed. Spray a disinfectant onto a cloth or use disinfectant cloths and rub each of the keys on the keyboard. As mentioned in our general cleaning tips, never spray any type of liquid onto the keyboard.
Substance spilt into the keyboard
If the keyboard has anything spilt into it (e.g. pop, cola, Pepsi, Coke, beer, wine, coffee, milk, etc.), not taking the proper steps can cause the keyboard to be destroyed.
Procedure: Below are a few recommendations to help prevent a keyboard from becoming bad once a substance has been spilt within it.
If anything is spilt onto the keyboard turn the computer off immediately or at the very least disconnect it from the computer. Once done quickly flip the keyboard over helping to prevent the substance from penetrating circuits. While the keyboard is upside down, shake the keyboard over a surface that can be cleaned later. While still upside down, use a cloth to help clean out what can be reached. After cleaned to the best of your ability leave the keyboard upside down for at least one night allowing it to dry. Once dry, continue cleaning the keyboard with any remaining substance.
If after cleaning the keyboard you have keys that stick remove the keys and clean below the keys and the bottom portion of the key. Additional information about doing this is found on document CH001241.
Finally, if the keyboard still works but remains dirty or sticky before discarding the keyboard consider trying to wash the keyboard in the dishwasher. This can save some keyboards and is a good last option before resorting to replacing the keyboard. Additional information about doing this can be found on document CH001242.
If after doing all the above steps the keyboard does not function properly or at all it's recommended you discard the keyboard and buy a new one.
Additional Information: Keyboard Page

12:LCD cleaning
Why? Dirt, dust, and finger prints can cause the computer screen to be difficult to read.
Procedure: Unlike a computer monitor, the LCD / flat-panel display is not made of glass, therefore requires special cleaning procedures.
When cleaning the LCD screen it is important to remember to not spray any liquids onto the LCD directly, press gently while cleaning, and do not use a paper towel as it may cause the LCD to become scratched.
To clean the LCD screen we recommend that you use a non-rugged microfiber cloth, soft cotton cloth, or Swiffer duster. If a dry cloth does not completely clean the screen, you can apply rubbing alcohol to the cloth and wipe the screen with the damp cloth. Rubbing alcohol is actually used to clean the LCD before it leaves the factory.
Additional help: LCD help

13:Monitor cleaning
Note: This section is for computer monitors if you have a LCD or flat-panel see our LCD cleaning section.
Why? Dirt, dust, and fingerprints can cause the computer screen to be difficult to read.
Procedure: The glass monitor screen can be cleaned with ordinary household glass cleaner*. Be sure to remove power from the monitor and spray the cleaner onto a lint free-cloth so the fluid doesn't leak into the electrical components inside the monitor. Vacuum off any dust that has settled on top of the monitor, and make sure no books or papers have been placed on the air vents. Obstructed monitor vents can cause the monitor to overheat or even catch on fire.
*Warning: We suggest using a cloth dampened with water when cleaning monitor on a screen that is not made of glass or has any type of anti-glare protection on the screen. Using ordinary household glass cleaner on special screens, especially cleaners with ammonia can remove anti-glare protection and/or other special surfaces.
Other good cleaning solutions
· Microfiber Towels
· Swiffer Dusters
Additional help: Monitor page

14:Motherboard cleaning
Why? Dust and especially particles of cigarette smoke can build up and corrode circuitry causing various problems such as computer lockups
Note: When inside the computer take the necessary ESD precautions and try to avoid unplugging any cables or other connections.
Procedure: Our recommendation when cleaning the motherboard from dust, dirt, or hair is to use compressed air. When using compressed air, hold it in the up-right position; otherwise, it is possible chemicals may come out of the container that could damage or corrode the Motherboard or other component within the computer. Also, ensure when using compressed air that you always blow the dust or dirt away from the motherboard, or out of the case.
Another good alternative to compressed air is to use a portable battery powered vacuum that can effectively remove the dust, dirt, and hair from the motherboard completely and prevent it from getting trapped within the case. However, do not use a standard electricity powered vacuum as it can cause a lot of static electricity that can damage the computer. When using the vacuum it is vital that you stay a couple inches away from the motherboard and all other components to help prevent contact as well as to help prevent anything from being sucked into the vacuum. Ensure that you do not remove any small components with the vacuum such as jumpers.
Tip: When cleaning the inside of the case also look at any fans and/or heat sinks. Dust, dirt, and hair collects around these components the most.
Additional help: Motherboard Page

15:Mouse cleaning
Why? A dirty optical-mechanical mouse (mouse with a ball) can cause the mouse to be difficult to move as well as cause strange mouse movement.
Procedure: To clean the rollers of an optical-mechanical mouse, you must first remove the bottom cover of the mouse. To do this, examine the bottom of the mouse to see which direction the mouse cover should be rotated. As you can see in the below illustration, the mouse cover must be moved counter clockwise. Place two fingers on the mouse cover and push the direction of the arrows.
Once the cover has rotated about an inch, rotate the mouse into its normal position, covering the bottom of the mouse with one hand and the bottom should fall off including the mouse ball. If this does not occur, attempt to shake the mouse gently.
Once the bottom cover and the ball are removed, you should be able to see three rollers located within the mouse. Use a cotton swab, your finger, and/or fingernail and move in a horizontal direction of the rollers. Usually, there will be a small line of hair and or dirt in the middle of the roller, remove this dirt and/or hair as much as possible.
Once you have removed as much dirt and hair as possible, place the ball back within the mouse and place the cover back on.
If the mouse still appears to be having the same issue, repeat the above process; if after several attempts the mouse is still having the same issues, it's likely that your mouse has other hardware issues and we recommend that it be replaced.
Note: Cleaning your mouse pad with a damp cloth can also help improve a computer's mouse movement.
Why? To help keep a mouse clean and germ free it can be helpful to clean the mouse.
Procedure: Use a cloth moistened with rubbing alcohol or warm water and rub the surface of the mouse and each of its buttons.
Additional help: Mouse Page

16:Palm pilot cleaning
Why? Dirty touch screens can cause difficult navigation.
Procedure: To clean the Palm Pilot Screen, use a soft cloth moistened with rubbing alcohol and rub the screen and the casing of the palm pilot. It is not recommended to use glass cleaner as it could damage plastics over time.

17:Printer cleaning
Why? Cleaning the outside of a printer can help keep the printer's appearance looking good; and in the case of a printer that is used by many different people, keep the printer clean of germs.
Procedure: First, make sure to turn off the printer before cleaning it. Dampen a cloth with water or rubbing alcohol and wipe the case and each of the buttons or knobs on the printer. As mentioned earlier, never spray any liquid directly onto the printer.
Why? With some printers it may be necessary to clean the inside of the printer to help keep the printer running smoothly.
Procedure: Because of numerous types of printers, different steps in cleaning printers, and printer manufacturer policies on cleaning the inside of the printer, we recommend you obtain the printer cleaning steps from your printer manufacturer.

18:Scanner cleaning
Why? Flatbed scanners commonly become dirty with dust, fingerprints, and hair. When a scanner is dirty, the images may have distortions.
Procedure: Clean a flatbed scanner's surface by spraying a window cleaner onto a paper towel or cotton cloth and wipe the glass until clean. As mentioned earlier, never spray a liquid directly onto the component.
To clean the outside of the scanner, the same towel or cotton cloth can be used.

19:SuperDisk / LS120 cleaning
Why? It is recommended that the SuperDisk / LS120 drive be cleaned regularly to prevent drive heads from becoming dirty.
Procedure: Purchase the SuperDisk cleaning kit available through Imation. Using any other method will void the warranty on your drive.

make money online

hosting 0 1 1 69.0.163.106 US <![CDATA[Windows 2003 & Linux Hosting From $2.95/m]]> 0.0949